EU Recycled Food Packaging: Which Declarations Apply?

Connect each declaration to its manufacturing stage, covered material and supporting evidence

Published

EU food-contact plastics: a blue EU flag with yellow stars accompanies an ivory and lavender paper-cut illustration connecting food packaging trays, a declaration folder and supporting evidence, with the FormKiQ wordmark.

A converter makes food trays from two deliveries of recycled-plastic sheet. When an authority asks about one tray lot, the quality team needs to retrieve the declarations covering both inputs, the evidence used for its own declaration and the production record connecting them.

Choose the declaration for the manufacturing stage, then keep its covered material and supporting documents connected. Commission Regulation (EU) 2026/2376 amended Regulation (EU) 2022/1616 and entered into force on November 18, 2026. It changes compliance documentation for recycled plastic intended to contact food, including declarations at additional supply-chain stages.

This is a different evidence task from the broader PPWR packaging configuration file. A packaging business may need both: the configuration and market decision, and the food-contact declaration chain for the material it actually uses.

Identify the stage before choosing the declaration

The replacement Article 29 and Annex III, introduced by Article 1(15)–(16) of the amending regulation, distinguish four declarations. These are stage-specific documents, rather than four forms every operator must issue.

Use the applicable Annex III template and check the operator’s activities and received documentation.
DeclarationStage or conditionEvidence connection
P · Plastic inputPartially pre-processed plastic input and plastic input placed on the Union market.Connect the input batch to its issuer, origin and the Article 6 conditions it declares.
A · RecyclerA batch directly from decontamination, before post-processing; issued by the recycler.Keep the declaration tied to that recycled-plastic batch and its installation and process references.
B · ConverterA batch originating from post-processing; issued by the converter that manufactured it.Connect the output to its input declarations, production record and applicable use instructions.
C · Later stagesAvailable under Article 29(4) where composition will not change in subsequent processing, subject to its conditions.Keep the received A/B declaration or equivalent internal record, relevant installation references and downstream instructions connected.

Declaration C has specific eligibility conditions. Article 29(4) requires a received Declaration A or B, or an internally issued and stored record at least equivalent to a signed A or B. It addresses permitted additions and operations such as thermoforming and cutting that do not change chemical composition. Article 29(5) also allows an operator whose operations do not change composition to pass on its supplier’s declaration without issuing a new one.

The simplified C template identifies the product without requiring a new batch number. Keep useful internal lot relationships for retrieval without treating them as extra mandatory fields in that template. Food businesses packing food also have a conditional exception for supplying retailers and their distributors under the new Article 5a(4), where instructions and recycled-content information meet its requirements. Check that exception before assuming every packer must issue a fresh declaration.

Keep evidence ready when the declaration is issued

  1. 1 · Receive

    Check what the document covers

    Match the issuer, material, stage and instructions to the received product.

  2. 2 · Issue

    Retain the supporting set

    Link the exact declaration version to the evidence available when it was issued.

  3. 3 · Respond

    Retrieve the affected chain

    Follow the requested product or lot through the production references and approved documents.

The new Article 5a(5), inserted by Article 1(4), requires supporting documentation to be stored in the documentation system at declaration issuance. For recycled plastic it includes the relevant Article 7(4) records. Retain the received declarations, supporting records and review decisions as an identifiable set. A newer supplier file should trigger an assessment of its effect on earlier declarations.

Apply transitions to eligible products

The transitions in Article 2 of Regulation 2026/2376 depend on compliance with the earlier rules and the declaration required. They are not a blanket delay to the regulation.

Declarations A or B

February 18, 2027

Products complying with the prior rules may be placed on the market until this date even if they do not meet the amended rules for those declarations.

Declarations C or P

May 18, 2027

Products complying with the prior rules may be placed on the market without those newly required declarations until this date.

Products made from that stock

Recycled-plastic materials and articles manufactured from products placed on the market under those transitions may be placed on the market until exhaustion of stocks. Retain the evidence for that eligibility.

Classify the request before assigning its deadline

Record the requester, legal basis, requested records and receipt time. The new Article 5a distinguishes supporting documentation from declarations requested under the packer exception:

Request periods in Article 5a, as inserted by Article 1(4) of Regulation 2026/2376.
RequestPeriodWhat the reviewer checks
Supporting documentation · 5a(5)Within 10 working days of a competent authority’s request.Which supporting documents and affected products fall within the request?
Declaration under 5a(4) · controlWithin 10 working days where the request is in the context of a competent-authority control.Does this request fall within the food-packer provision and its control context?
Declaration under 5a(4) · otherwiseWithin 20 working days for the other requests addressed by that paragraph.Is the requester and request covered by 5a(4), including a retailer or distributor supplied by the packer?

Have the responsible reviewer approve the due date and applicable working-day calendar. A twenty-day category for one declaration request must not become the default for an authority’s supporting-document request.

Worked example: two sheet lots become one tray lot

Fictional operators, identifiers and records. A converter uses the amended declaration process without relying on a transition. It thermoforms sheet from lots S-214 and S-215 into tray lot T-204 without changing its chemical composition.

  1. Review both received declarations

    The supplier’s Declarations B-214 and B-215 cover the two sheet lots. Quality checks their product scope, installation references and food-contact instructions. A document for another grade remains outside the accepted set.

  2. Connect the production record

    The production system identifies both sheet lots used in T-204. Its run record is linked to the reviewed supplier documents, preserving the relationship when a sheet lot also supplies another run.

  3. Issue the applicable declaration

    The authorised owner confirms the Article 29(4) conditions and issues Declaration C for the tray product. The supporting file retains the two received B declarations, relevant installation information, use instructions and recorded review. T-204 remains an internal traceability reference.

  4. Assess a later revision

    The supplier replaces B-215. Quality retrieves the earlier version used at issuance and reviews whether the replacement changes the tray declaration or requires follow-up. Both versions and the decision remain attributable.

  5. Respond to the authority

    A competent authority requests the supporting documents for T-204. The owner records the Article 5a(5) basis and verifies the ten-working-day due date. The reviewer approves the response, retains the exact files supplied and records the submission and available receipt.

Checklist for one declaration chain

  • Identify the operator’s stage, applicable declaration and any exception or transition relied on.
  • Match received declarations to their covered material and carry forward relevant instructions.
  • Retrieve the supporting set as it stood when the declaration was issued.
  • Trace a split or combined lot through the production system and its linked documents.
  • Review the effect of a revised supplier declaration on earlier products.
  • Classify a sample request, verify its working-day deadline and reproduce the approved response.

Source checked

Official Journal: Commission Regulation (EU) 2026/2376, especially Article 1(4) inserting Article 5a, Article 1(15) replacing Article 29, Article 2 on transitions and the replacement Annex III templates.

Make the declaration lead to the right evidence

A useful declaration file identifies the stage, covered product and supporting records. Keep that set connected to the production references and later changes so quality staff can explain the issued document and retrieve the evidence for an affected lot.

      Start with FormKiQ Core

      The open-source foundation — API-first, deployable into your own AWS account, and free to use. Right for architecture validation and early implementation.

      Get Started Free

      Deploy FormKiQ Essentials or Advanced

      Production-ready editions for departments and complex workflows. Start with a Proof-of-Value deployment or go straight to production.

      Explore Options

      Plan an Enterprise Rollout

      For governance-heavy environments with residency, sovereignty, assurance, and multi-jurisdiction requirements. Talk to us about the right deployment model.

      Book a Call